Gaming2 min read0 comments

GTA 6 can reach 60 FPS through Veyra, but not natively

Veyra adds generated frames to the console signal, but the game still runs at 30 FPS and the setup needs specific hardware.

Gaming and NFTs
Published Updated
GTA 6 · PS5: 60 FPS

Key takeaways

  • GTA 6 does not run at 60 FPS natively on PS5 or Xbox, including the PS5 Pro.
  • Veyra is an open-source tool that adds frame generation and upscaling to an external video signal.
  • One setup requires a capture card, a compatible PC, an RTX 40-series GPU and an OLED monitor.
  • Modder Phosphen used PS Remote Play and an RTX 5080, reporting a rise from about 30 to 59 FPS.
  • Part of those measurements used recordings, and independent real-time tests have not confirmed them.

What the method does

Grand Theft Auto 6 is out worldwide, and players have found that it does not run at 60 frames per second even on the PlayStation 5 Pro. A workaround exists, but it does not come from Rockstar and it is not simple.

The method relies on Veyra, an open-source program that applies frame generation and image upscaling to an external video signal in real time. The game keeps running at 30 FPS on the console; Veyra adds frames to the image on its way to the screen. According to Areajugones, the result is not the same as native 60 FPS and can produce visual defects during fast movement or in interface elements.

Hardware requirements

Adrenaline describes one setup: a capture card with HDMI 2.1 and USB-C 3.2, a PC compatible with that format, at least an NVIDIA RTX 40-series GPU and an OLED monitor to keep input lag as low as possible.

A second route skips the capture card. Modder Phosphen used the PS5's Remote Play feature to send the image to a PC and processed it with Veyra, according to GameVicio. Phosphen published an installer on GitHub that configures Veyra and suggests settings based on the graphics card in use.

Measured gains and open questions

Phosphen's tests, reported by GameVicio, raised the presentation from about 30 to 59 FPS on a GeForce RTX 5080, combining neural rendering and frame generation. Part of those measurements used gameplay recordings, and independent real-time tests have not confirmed the figures.

Because the game logic still runs at 30 FPS, the added frames can create a mismatch between what players see and how the game responds, plus extra latency from the image passing through several processing steps, Areajugones notes. Neither report says whether Rockstar plans a native 60 FPS mode.

Sources

3 reports
  1. AdrenalineGTA 6 pode ser jogado a 60 FPS, mas o método para isso não é simples
  2. AreajugonesCómo jugar a GTA VI a 60 FPS en PS5 y Xbox: existe una alternativa, pero no está al alcance de todos
  3. GameVicioGTA 6 com DLSS 5 e 60 FPS: modder usa RTX 5080 para melhorar gráficos do jogo no PC

This article was drafted by Quest, an AI reporter of BattleTown News, from the reports listed above.

Frequently asked questions

Does GTA 6 run at 60 FPS on PS5 or Xbox after using Veyra?

No. The game still runs at 30 FPS on the console; Veyra adds generated frames to the signal, so the result is not native 60 FPS.

What hardware does the Veyra method require?

According to the reports, it requires a capture card with HDMI 2.1 and USB-C 3.2, a compatible PC, at least an NVIDIA RTX 40-series GPU and an OLED monitor. A separate experiment by modder Phosphen used PS Remote Play and an RTX 5080 instead of a capture card.

Have the 60 FPS results been independently verified?

Phosphen reported a rise from about 30 to 59 FPS, but part of the measurements used gameplay recordings and independent real-time tests have not confirmed the results.

This story is for information only. It is not financial, investment or legal advice. Disclaimer

Comments: 0 comments

BattleTown: tank battles in the browser

New mini-games, Storm and Breach, are already in BattleTown

Back to the feed

Read also

Type at least 2 characters